Portable multicomponent gas analyzers - leak detectors DOZOR-S-M
View the embedded image gallery online at:
https://www.orion.com.ua/index.php/en/products/perenosnye-gazoanalizatory-3/mnogokomponentnye-gazoanalizatory#sigProGalleria5b1090c35b
https://www.orion.com.ua/index.php/en/products/perenosnye-gazoanalizatory-3/mnogokomponentnye-gazoanalizatory#sigProGalleria5b1090c35b
Gas analyzer - leak detector DOZOR-S-M
Portable multicomponent gas analyzers, gas detectors and leak detectors are designed for simultaneous measuring of one to five gas mixture components concentration.
Gas analyzers - leak detectors are equipped with:
• built-in light-audible signalling;
• digital display with indication of each measuring gas concentration;
• automatic calibration and "zero" installation system;
• changeable smart sensors;
• built-in mini pump for gas sampling from hard-to-reach places;
• built-in charging device with automatic cut-off at the end of the battery charge;
• file-archiving system of the measured values in real-time mode;
• built-in infrared port to display archival data on the computer.
The main characteristics of portable multicomponent gas analyzers - leak detectors:
1. Controlled components: combustible gases and vapours Cl2, CO, H2S, NH3, NO2, O2, SO2, CO2
2. Operating temperature range - from -100C to +500 C
3. The explosion protection degree: 1ExibdIIBT4
4. Continuous operation time without recharging the batteries - not less than 20 hours
5. Overall dimensions: 200h174h81 mm
6. Weight - 1.8 kg.
NEW! Freon measurement R22, R-134a, R404a, R-407c, R-410 and other refrigerants as well as the measurement of MPC methane СН4
|
Metrological characteristics of the portable multicomponent gas analyzers - leak detectors:
Name of detected gas mixture components |
Measuring range interval |
THRESHOLD 1 |
THRESHOLD 2 |
THRESHOLD 3 |
Combustible gases,vapors to explosive concentrations |
0-50% LFL (lower flammability level) |
10% LFL |
20% LFL |
- |
MPC methane CH4 |
0-2000 mg/m3 | 300 mg/m3 |
1000 mg/m3 |
- |
Ammonia NH3 | 0-120 (0-1500) mg/m3 |
20 (500) mg/m3 |
60 (1500) mg/m3 |
200 mg/m3 |
Chlorine Cl2 | 0-5 (0-20) mg/m3 |
1,00 (5) mg/m3 |
5,00 (20) mg/m3 |
- |
Nitrogen oxide NO | 0-30 (0-300) mg/m3 |
5 (50) mg/m3 |
15 (150) mg/m3 |
|
Nitrogen dioxide NO2 | 0-15 mg/m3 |
5,0 mg/m3 |
15,0 mg/m3 |
- |
Sulphur dioxid SO2 | 0-120 (0-1500) mg/m3 |
10,0 mg/m3 |
50,0 mg/m3 |
- |
Hydrogen disulfide H2S | 0-50 mg/m3 |
10,0 mg/m3 |
30,0 mg/m3 |
- |
Oxygen O2 | 0-30% volume ratio |
19,0% volume ratio |
17,0% volume ratio |
23,0% volume ratio |
Carbon monoxide CO | 0-120 mg/m3 |
20,0 mg/m3 |
100,0 mg/m3 |
- |
Carbone dioxide CO2 | 0-1 (0-100) % volume ratio |
0,25 (30) % volume ratio |
0,5 (40) % volume ratio | |
Freons | 0-10000 ppm | 300 ppm | 500 ppm |